Related Manuals for GMC RM1000
Summary of Contents for GMC RM1000
-
Page 1: Line Trimmer
1000W REAR MOTOR LINE TRIMMER RM1000 INSTRUCTION MANUAL Black Magenta Code: RM1000 Cyan Yellow Date: 061221 Edition: 04 Op: DCR... -
Page 2: Table Of Contents
Contents Warranty Introduction Environmental protection Description of symbols Specifications Safety instructions Additional safety rules for line trimmers Unpacking Contents of carton Know your product Assembly To attach the two sections of the shaft Fitting the carry strap Before starting Switching on and off Trimming Changing the line and spool Power cable restraint... -
Page 3: Introduction
Introduction Your new GMC power tool will more than satisfy your expectations. It has been manufactured under stringent GMC Quality Standards to meet superior performance criteria. You will find your new tool easy and safe to operate, and, with proper care, it will give you many years of dependable service. -
Page 4: Safety Instructions
Safety instructions WARNING. Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Save these instructions Work area •... -
Page 5: Additional Safety Rules For Line Trimmers
• Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. • Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. -
Page 6: Unpacking
WARNING. After switching off the machine, the cutting device continues to rotate for a few more seconds. • Only use the original type of nylon line. Under no circumstances use metal line instead of nylon. • Do not use the machine to cut grass which is not on the ground. -
Page 7: Know Your Product
Before using the line trimmer, familiarise yourself with all the operating features and safety requirements. This line trimmer is to be used for trimming soft, new growth only. Use the tool and accessories only for the applications intended. All other applications are expressly ruled out. -
Page 8: Assembly
Note. If the two shafts do not fully fit together, rotate the head of the line trimmer to assist in aligning the drive shafts. 2. Tighten the upper shaft section to the lower shaft by turning the shaft locking knob (11) clockwise and firmly gripping the shaft locking nut (17). -
Page 9: Switching On And Off
1. Make sure that the work area is free of rocks, debris, lines and other foreign objects. 2. To start the line trimmer, first push the lock-off button (13) and then press the trigger switch (3). To switch off the trimmer simply release the starting switch. Start the machine before approaching the grass to be cut. -
Page 10: Power Cable Restraint
To fit the extension cord to the support, make a loop in the extension cord and fit the loop into the curved recess at the back of the line trimmer. Push the loop downwards so it fits securely into the round cut away section. -
Page 11: Maintenance And Cleaning
2. Do not store in a nylon bag as this can encourage the formation of mould. 3. At the end of the season, give the trimmer an overall cleaning and a thorough check. 4. Do not leave the trimmer resting on the floor for extended periods as it could cause the shape of the guard to alter, posing a safety risk. - Page 12 GMC customer assist If your product needs repairing, replacing, technical service or you simply need help or advice, please contact us on our Customer Assist Line 1300 880 001 (Australia) or 0800 445 721 (New Zealand). For prompt service we suggest you log your service request online at www.gmcservice.com.au.