Brinkmann Elite Owner's Manual page 27

Figure 1
Figure 3
Figure 4
M4
Washer
Wing Nut
Side
Burner
M4 Washer
M4 Nut
Electrode
Side Burner
Igniter Lead
Step 13
To install the side burner, remove
the pre-attached nut and M4
washer on the side burner and
install the side burner (Figure 1).
Attach one M4 bolt (silver) to secure
the tip of the side burner (Figure 2).
Attach one M4 X 10 mm bolt (silver)
from the top of the side burner to
secure in place (Figure 3). Attach
two M4 washers and one M4 nut
and one wing nut to secure the side
burner (Figure 4).
Figure 2
Bolt
Step 14
Attach side burner igniter lead
to electrode on bottom of side
burner.
26