Advertisement
Washing hard floors (only with model W87-DV-T)
CAUTION: To prevent damage to wood floors and other hard floors, follow the flooring manufacturer's
cleaning recommendations.
NOTE: If using cleaner on sealed wood floors, inspect floor surface for worn finish, bare wood or separated
joints. It's not recommended to use the cleaner on wood floors if any of these conditions exist.
IMPORTANT: Before attaching the hard floor squeegee onto machine, all solution should be removed from tanks.
Place hard floor squeegee onto nozzle base by attaching it to the front section first.
Then, click the back section into place. Fill the clean water and solution tank with hard
floor solution as specified on pages 5 and 6
Turn the machine on.
vax.co.uk
Recline the machine. When
the machine is reclined,
the brushes will rotate.
In an upright position, the
brushes will not rotate.
For best results apply
solution on the forward
stroke and release the
trigger to recover solution
on the backward stroke.
To avoid saturating your
hard floor, do not use more
than 4 wet strokes over
one area. Always end with
dry strokes.
How To Use
Set the wash/rinse/max
extract switch to WASH.
Spinscrub brushes deep
clean your hard floors
with water and solution
to remove dirt and stains.
Unwrap power cord and
plug unit in.
Press trigger to
release solution.
8
Hide quick links:
Advertisement
