Related Manuals for Vax W87-DV series
Summary of Contents for Vax W87-DV series
-
Page 1: User Guide
Designed in the UK Dual V Advance User Guide W87-DV Series vax.co.uk Performance is everything. -
Page 2: Table Of Contents
Contents Contents Machine Overview General Safety Information Getting Started How To Use Looking After Your Machine FAQs Other Information Guarantee... -
Page 3: Machine Overview
Stretch hose Power cable Stretch hose caddy Max Extract pedal Recline pedal Wheels Vax cleaning solution Vax hard floor solution (only available with W87-DV-T) Hard floor squeegee (only available with W87-DV-T) Lint filter Base lint filter Upholstery tool NOTE: Some parts may vary according to model. Please check inside flap of box for more details. -
Page 4: General Safety Information
The appliance should only be used as described in the quick start guide (if applicable) or in the full online user guide. 10. Only Vax recommended attachments and solutions should be used with this appliance. Do not use this carpet washer if it has been dropped, damaged, left outdoors or dropped into water. -
Page 5: Getting Started
Turn locking tab clockwise Attach bottom caddy to unit. to secure. Ensure locking section to unit. tab is vertical. Turn locking tab clockwise to Fit hose connector first secure. Ensure locking tab then wrap hose around is vertical. the caddy. vax.co.uk... -
Page 6: How To Use
• Test your carpets/rugs/upholstery - Run the machine over a small hidden area. If no pile distortion occurs continue cleaning over required area. IMPORTANT: Only use Vax carpet cleaning solution. Using other solutions may cause excess foaming. Excessive foam will prevent the machine from working effectively. Using other solutions will invalidate the guarantee. IMPORTANT: The clean water tank should only be filled with warm water (max 40°C). -
Page 7: Operating Carpet Washer
The Max Extract pedal will remain down when in use. Use this mode in combination with the Max Extract switch for superior drying performance. The brushes will not rotate For best results use straight when the Max Extract pedal parallel strokes. is pressed. vax.co.uk... - Page 8 How To Use Washing your carpets Unwrap power cord and Turn the machine on. Recline the machine. When Set the wash/rinse/max extract switch to WASH. plug unit in. the machine is reclined, the brushes will rotate. Spinscrub brushes deep In an upright position, the clean your carpets with brushes will not rotate.
- Page 9 For best results apply solution on the forward stroke and release the trigger to recover solution on the backward stroke. To avoid saturating your hard floor, do not use more than 4 wet strokes over one area. Always end with dry strokes. vax.co.uk...
- Page 10 How To Use Rinsing your carpets and hard floors (optional) Rinsing is not necessary, but will help remove solution and residue and help your carpets or hard floors look fresher. Turn the machine on. Recline the machine. When Set the wash/rinse/max extract switch to RINSE.
- Page 11 Extraction combination with the max occurs during forward and extract pedal. The brushes backward strokes. will not rotate when the max extract pedal is pressed, and the pedal will remain down when in use. vax.co.uk...
- Page 12 How to use Picking up spills For small spills, use the upholstery wash tool provided. Remove hose. Place hose into hose connection port and turn clockwise to secure. Align solution tube with Attach the upholstery wash Turn the machine on. Pull wash tool back over connector port.
- Page 13 Run the Spinscrub brush and upholstery wash tools over a small hidden area. The Spinscrub wash tool has rotating brushes to tackle spots and stains. The clean water tank will need to be filled with Vax carpet cleaning solution and water before use. Remove hose.
-
Page 14: Looking After Your Machine
Cleaning the dirty water tank lint filter IMPORTANT: Cleaning filters maintains cleaning performance. Vax recommends that your filters should be checked and cleaned after each use. If your filters are washable make sure that they are completely dry before inserting them back into the carpet washer. - Page 15 Slide tabs into holes. removing it from cleaner Press down on nozzle to secure. Not fitting the nozzle correctly will result in poor water pick up. vax.co.uk...
- Page 16 Machine Overview Looking After Your Machine WARNING: To reduce the risk of electric shock, turn the machine off and unplug from electrical socket before performing maintenance/troubleshooting checks. IMPORTANT: All water and solution must be removed from tanks before removing blockages from the brushes. Removing blockages from the brushes Place the machine flat.
- Page 17 • The float in the dirty water tank may have been activated. Empty the dirty water tank if full. If the dirty water tank is not full then switch the machine off and wait for the float to settle before re-starting your machine • The dirty water tank may be full and the auto shut off engaged. Empty the dirty water tank • Ensure the dirty water tank is fitted correctly and the tank cap is securely fitted • Check the hose for blockages • Check the Spinscrub brushes for blockages • Check the nozzle is fitted correctly and for any blockages. Why won’t the solution/clean water dispense? • Ensure the clean water tank is fitted securely • The solution/clean water tank may be empty • Check the machine is on the correct setting Why won’t the brushes rotate? • The brushes will only rotate when the unit is reclined and turned on • Check the lint filter and clean if necessary • Check the machine is on the correct setting vax.co.uk...
- Page 18 Any queries or concerns about using your Vax, simply visit; vax.co.uk/support – vaxireland.ie or call the Vax Careline. Calls are charged at the UK local rate. Please make a note of the serial number and model number of the vacuum cleaner before calling.
- Page 19 9:00 - 17:00 we’re here if you need us Instead of taking me back to the shop, simply visit: vax.co.uk/support or call (UK) 0844 412 8455 (ROI) 1-800 928 308 Let us know what you think @VaxUK Designed in the UK...
- Page 20 Vax Ltd., Kingswood Road, Hampton Lovett, Droitwich, Worcestershire, WR9 0QH, UK email: info@vax.co.uk website: vax.co.uk Performance is everything. Version 1.0...