Advertisement
Operating your carpet washer
Wash/Rinse/Max Extract switch
Max Extract pedal
The Max Extract pedal will stop the Spinscrub brushes from rotating, using the entire power of the machine to
extract water/solution from your carpets. The Max Extract pedal will remain down when in use.
Use this mode in combination with the Max Extract switch for superior drying performance.
The brushes will not rotate
when the
Max Extract pedal
is pressed.
vax.co.uk
The wash/rinse/max extract switch allows you to easily change from cleaning your carpet
with a solution/water mix, rinsing with water only, and solely extracting water and solution
from your carpet.
WASH: Spinscrub brushes deep clean your carpets with water and solution to remove
dirt and stains.
RINSE: Only water is released to help remove solution residue.
MAX EXTRACT: No water/solution mix is released onto your carpets (even when
trigger is pressed) extracting any water/solution from your carpets. Use this mode in
combination with the Max Extract pedal for superior drying performance.
For best results use straight
parallel strokes.
How To Use
Remove the detergent tank cap and pour
required carpet/hard floor cleaning solution
into tank.
Tighten cap before returning tank to unit.
6
Hide quick links:
Advertisement
