Specifications/Technische Daten - Electro-Voice CPS2.4 Owner's Manual

CONTRACTOR PRECISION SERIES

Specifications/Technische Daten

Amplifier at rated conditions, both channels driven, 8 Ω load, unless otherwise specified.
Load Impedance
Maximum Midband Output Power
THD = 1%, 1 kHz, Dual Channel
Rated Output Power
THD < 0.1%, 20 Hz...20 kHz
Maximum Single Channel Output Power
Dynamic-Headroom, IHF-A
Maximum Single Channel Output Power
Continuous, 1 kHz
Maximum Bridged Output Power
THD = 1%, 1 kHz
Maximum RMS Voltage Swing
THD = 1%, 1 kHz
Power Bandwidth
THD = 1%, ref. 1 kHz, half power @ 4 Ω
Voltage Gain, ref. 1 kHz
Input Sensitivity
rated power @ 8 Ω, 1 kHz
THD at rated output power
MBW = 80 kHz, 1 kHz
IMD-SMPTE, 60 Hz, 7 kHz
DIM30, 3.15 kHz, 15 kHz
Maximum Input Level
Crosstalk
ref. 1 kHz, at rated output power
Frequency Response, ref. 1 kHz
Input Impedance, active balanced
Damping Factor, 1 kHz
Slew Rate
Signal to Noise Ratio Amplifier
A-weighted
Output Noise, A-weighted
Output Stage Topology
Power Requirements
Power Consumption
1/8 maximum output power @ 4 Ω
Mains Fuse
Protection
Cooling
Ambient Temperatur Limits
Safety Class
Dimensions (W x H x D), mm
Weight
Signal Processing
Optional
Depending on the ambient temperature, the unit might not operate continously at 2 Ω load in Dual Mode or 4 Ω in Bridged Mode.
In addition input power exceeds 1.1 times rated power consumption with 2 Ω load in Dual Mode or 4 Ω load in Bridged Mode
30 Owner's Manual / Bedienungsanleitung
CPS2.4
2 Ω 4 Ω 8 Ω 2 Ω
650 W 450 W 270 W 900 W 600 W 380 W 1250 W 900 W 550 W 1800 W 1200 W 750 W
- 400 W 200 W -
1150 W 660 W 350 W 1700 W 950 W 480 W 2450 W 1400 W 700 W 3400 W 1800 W 950 W
850 W 540 W 310 W 1200 W 750 W 420 W 1700 W 1100 W 630 W 2400 W 1500 W 850 W
- 1300 W 900 W -
55.3 V
+2.2 dBu (1.0 V ) +3.1 dBu (1.11 V
rms
25 V/μs
> 106 dB
Class AB
240 V, 230 V, 120 V or 100 V; 50 Hz...60 Hz (factory configured)
550 W
240 V / 230 V: T10AH; 240 V / 230 V: T12AH;
120 V / 100 V: T20AH 120 V / 100 V: T25AH
Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn-
12.6 kg (27.8 lbs) 14.8 kg (32.6 lbs)
2-Way crossover, internal filter card, 24 dB, LR
500 Hz (NRS 90250), 800 Hz (NRS 90251)
CPS2.6 CPS2.9
4 Ω 8 Ω 2 Ω 4 Ω
500 W 250 W - 800 W 400 W
1800 W 1200 W - 2800 W 1800 W
65.1 V 78.8 V
< 10 Hz...30 kHz
32.0 dB
) +5.1 dBu (1.39 V
rms
< 0.03%
< 0.1%
< 0.05%
+21 dBu (8.69 V )
rms
< -80 dB
10 Hz...40 kHz (±1 dB)
20 kΩ
> 300
26 V/μs 27 V/μs
> 107 dB > 109 dB
< -71 dBu
700 W 700 W
240 V / 230 V: T15AH;
120 V / 100 V: T25AH
on delay
Front-to-rear, 3-stage-fans
+5 °C...+40 °C (40 °F...105 °F)
I
483 x 88.1 x 421.5
16.3 kg (35.9 lbs)
Lo-Cut 50 Hz / 18 dB, switchable
CPS2.12
8 Ω 2 Ω 4 Ω 8 Ω
- 1100 W 550 W
- 3600 W 2400 W
90.6 V
) +6.6 dBu (1.66 V )
rms rms
30 V/μs
> 110 dB
Class H
850 W
240 V / 230 V: T15AH;
120 V / 100 V: T30AH
17.7 kg (39.0 lbs)