BT RESPONSE 15 PLUS User Manual page 13

The counter will display the
number of messages that have
been recorded in the memory.
If you have received 10 or more
messages the display will flash
9 to indicate this. See page 18
for a guide to the display.
Answer delay sets the number
of times your Response 15 Plus
will ring before answering a call.
Your Response 15 Plus' answer
delay is pre-set to 4 rings. You
can choose between 2-9 rings or
Time Saver.
Your Response 15 Plus can be set to
Time Saver mode. This means that
during remote access, if any messages
have been recorded your Response 15
Plus will answer after only 2 rings. If
there are no messages, it will answer
after 6 rings, thereby allowing you the
option of hanging up before your
Response 15 Plus answers, to avoid the
cost of a call.
Press and hold the
button. Your Response 15 Plus
Answer
on/off
will announce the current
answer delay: 'Answer delay
4 rings.'
Keep holding the
button. Your Response 15 Plus
Your Response 15 Plus will automatically
record an incoming message when it is
connected to your phone socket and set
to 'answer on' .
When your Response 15 Plus has received
new messages, the message counter
will display the number of messages you
have received.
Answer on/off
Answer on/off
will announce the answer delay
options and display the number
of rings.
When you hear your desired
setting, release the
button. After 2 seconds
on/off
your Response 15 Plus will
announce the new answer
delay setting and then return
to 'answer on' mode.
Press and hold the
Answer
on/off
button. Your Response 15
on/off
Plus will announce and display
the current answer delay
setting.
Two minutes is the maximum time
allowed for each incoming message.
If the maximum message length is
reached, your Response 15 Plus will
announce 'Thank you for calling' and
disconnect the line.
Answer
Answer
11