Record A Memo; Remote Access; Change The Remote Access Pin Code - BT VERVE 500 User Manual

In standby mode:
• Press and hold

Record a memo

1. In standby mode, press and hold
2. Speak your memo message clearly close to the base
microphone, press

Remote access

You can operate your answering machine from any
Touchtone™ phone by calling your BT Verve 500 and entering
a 3-digit security PIN. Using a PIN code prevents other
people from accessing your machine without permission.

Change the remote access PIN code

1. Press to open the main menu.
Menu
2. Use the
NAVIGATION
and press to select.
OK
3. Press or to highlight
UP DOWN
4. is highlighted, press
Change PIN
If you experience any problems, please call the Helpline on 0870 242 6652 or email bthelpdesk@convergys.com
to delete all messages.
.
to end recording.
buttons to highlight the
Remote control
.
OK
The maximum length for a memo is
the same as for incoming messages.
IMPORTANT
You should change the security PIN
symbol
from the original setting of 123.
It is advisable to make a note of your
new PIN code and keep it somewhere
and press .
safe.
OK
Answering machine 53