Electrolux EDC 5372 User Information page 26

7.Unscrew cover plates E from the front
of the machine, rotate through 180°,
screw on the opposite side.
8.Unscrew door lock F, push down
slightly and remove from the front of
the machine.
9.Disconnect cable connector from door
lock F.
10.Press snap-in button G in and down,
press cover down slightly and remove
from front of the machine.
11.Disconnect cable connector from
cover G.
12.Change door lock F over to the oppo-
site side, insert the cable connector
and screw down the door interlock.
13.On the other side, insert the cable
connector in cover G, insert cover and
allow snap-in button to lock into place.
14.Insert loading door and hinges into recesses on the front of the machine
and screw down.
15.Once the door stop has been replaced, check the function of the DOOR
(TÜR) button.
Note regarding contact protection: The machine is only secure for opera-
tions again once all plastic parts have been inserted.
26