Table of Contents
Advertisement
Drying
Switching machine on /
switching light on
Turn the programme selector to any programme or
turn it to LIGHT (BELEUCHTUNG). The machine has
been switched on. When the loading door is opened,
the drum is illuminated.
Selecting the programme
Use the programme selector to set the programme
you require.
The estimated time of the end of the programme ap-
pears in the multi-display.
Setting the pre-drainage
spin speed
If the washing in the washing machine was initially
drained prior to the drying cycle, the dryer can be set
according to the spin speed of the initial drainage
procedure. The higher the spin speed was, the short-
er the programme length for the drying cycle.
1. Press the RPM (U/MIN) button a number of times
until the desired spin speed of the initial drainage is
displayed.
12
Opening loading door / fill-
ing laundry
1. Open loading door:
– Either use force to push against the loading door
(push point
)
– or if the machine is switched on: Press the DOOR
(TÜR) button.
2. Load your laundry (do not force it in).
1
Caution! Do not jam laundry in between the
loading door and rubber seal.
3. Close loading door securely. Lock must audibly
lock.
EXTRA DRY
Cycle end at
dýaýa 1200 aýaýaýaýaýaýaýaýa
Tür
Porte
U/Min
Option
Ok
T/Min.
Options
Ok
12.45
14.40
Zeit
Temps
Advertisement
Table of Contents
