Final Gear Oil - Yamaha Virago XV535 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
CAUTION:
Do not put in any chemical addi-
l
tives. Engine oil also lubricates
the clutch and additives could
cause clutch slippage.
Be sure no foreign material en-
l
ters the crankcase.
8. Start the engine and warm it up for
a few minutes. While warming up,
check for oil leakage. If oil leakage
is found, stop the engine immedi-
ately and check for the cause.
EC000066
1. Final gear oil drain bolt

2. Final gear oil

3. Final gear oil filler bolt
4. Correct level
Final gear oil
Do not let foreign material enter the
final gear case. Be sure oil does not
get on the tire or wheel.
Oil level inspection
1. Place the motorcycle on a level
place and hold it in an upright posi-
tion. The engine should be cool at
ambient temperature.
2. Remove the oil filler bolt and
Oil replacement
1. Place an oil pan under the final
2. Remove the oil filler bolt and drain
3. Install and tighten the drain bolt to
EAU02943
EW000066
4. Fill the gear case to the brim of the
6-9
check the oil level. The oil level
should be at the brim of the filler
hole. Add the recommended oil if
necessary.
gear case.
bolt to drain the oil.
the specified torque.
Tightening torque:
Drain bolt:
23 Nm (2.3 mákg)
filler hole with the recommended
oil.