Speedometer; Handlebar Switches - Yamaha Virago XV535 Owner's Manual

1. Reset knob
2. Odometer
3. Trip odometer

Speedometer

The speedometer shows riding speed.
This speedometer is equipped with an
odometer and trip odometer. The trip
odometer can be reset to Ò0Ó with the
reset knob. Use the trip odometer to
estimate how far you can ride on a tank
of fuel. This information will enable you
to plan fuel stops in the future.
INSTRUMENT AND CONTROL FUNCTIONS
1. Pass switch Ò
2. Dimmer switch
3. Turn signal switch Ò
4. Horn switch Ò
EAU00095

Handlebar switches

Pass switch Ò
Press the switch to operate the passing
light.
Dimmer switch
Turn the switch to Ò
beam and to Ò
Turn signal switch Ò
This model is equipped with self-can-
celling turn signals. To signal a right-
hand turn, push the switch to the right.
To signal a left-hand turn, push the
switch to the left. Once the switch is re-
leased it will return to the center posi-
tion. To cancel the signal, push the
switch in after it has returned to the
Ó
center position. If the switch is not can-
Ó
celled by hand, it will self-cancel after
Ó
the motorcycle has travelled at least
EAU00118
150 meters and 15 seconds have
passed. The self-cancelling mecha-
nism only operates when the motor-
EAU00119
Ó cycle is moving. Therefore the signal
will not self-cancel while you are
stopped at an intersection.
EAU00121
Horn switch Ò
Ó for the high Press the switch to sound the horn.
Ó for the low beam.
3-2
EAU00124
Ó
EAU00129
Ó