Replacing The Tail/Brake Light Bulb - Yamaha Midnight Star XVS950A Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
5. Install the headlight bulb cover,
and then connect the coupler.
TIP
When installing the headlight bulb cov-
er, make sure the "TOP" mark faces up-
wards.
TOP
6
1. "TOP" mark
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
Replacing the tail/brake light
bulb
1. Remove the tail/brake light lens by
removing the screws.
1
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
EAU24133
1
1. Tail/brake light bulb
3. Insert a new bulb into the socket,
4. Install the lens by installing the
6-29
push it in, and then turn it clock-
wise until it stops.
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
[ECA10681]
1