Removing And Installing Panels - Yamaha YBR125 Custom Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Removing and installing pan-
els
The panels shown need to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time a panel needs to
be removed and installed.
1
6
1. Panel A
EAU18771
1
1. Panel B
Panel A
To remove the panel
1. Slide the panel lock cover open, in-
sert the key into the lock, and then
turn it 1/4 turn clockwise.
1. Panel lock cover
2. Unlock.
2. Pull the front of the panel out with
EAU36961
To install the panel
1. Secure the rear of the panel, and
2
1
6-6
the key inserted in the lock, and
then slide the panel forward to re-
lease it in the rear.
then push the front of the panel in
with the key inserted in the lock.