Yamaha YZF-R1 Owner's Manual page 22

INSTRUMENT AND CONTROL FUNCTIONS
To reset a tripmeter, select it by push-
ing the "SELECT" button, and then
push the "RESET" button for at least
one second. If you do not reset the fuel
reserve tripmeter manually, it will reset
itself automatically and the display will
return to the prior mode after refueling
and traveling 5 km.
3
Clock mode
Turn the key to "ON".
To change the display to the clock
mode, push the "SELECT" button for at
least one second.
To change the display back to the prior
mode, push the "SELECT" button.
To set the clock:
1. Push the "SELECT" button and
"RESET" button together for at
least two seconds.
2. When the hour digits start flashing,
push the "RESET" button to set
the hours.
3. Push the "SELECT" button, and
the minute digits will start flashing.
4. Push the "RESET" button to set
the minutes.
5. Push the "SELECT" button and
then release it to start the clock.
Self-diagnosis device
This model is equipped with a self-di-
agnosis device for various electrical cir-
cuits.
If any of those circuits are defective,
the engine trouble warning light will
come on, and then the multi-function
display will indicate a two-digit error
code (e.g., 11, 12, 13).
If the multi-function display indicates
such an error code, note the code num-
ber, and then have a Yamaha dealer
check the motorcycle.
3-7
CAUTION:
_
If the display indicates an error
code, the motorcycle should be
checked as soon as possible in or-
der to avoid engine damage.
_
ECA00127