Starting A Programme - AEG LAVATHERM 96690IH User Manual

S e n s i D r y
Anti- Spun at
Dry Plus Buzzer
crease RPM
To deactivate push again the above but-
tons until the symbol goes out of view.
You can activate the child lock function:
• before you push the Start/Pause button
- the appliance cannot start
• after you push the Start/Pause button -
all the push buttons and the pro-
gramme dial are deactivated
USER SELECTION MEMORY
1-2
Each programme set can be memorised
in the appliance under Memory 1 or
Memory 2 and used at a later date.
To memorise your configuration:
1. Set the programme and available
functions
2. Touch Memory 1 or 2 for a couple of
seconds,. The sound and the mes-
sage on the display confirm that the
configuration is memorised.
S e n s i D r y
Anti- Spun at
Dry Plus Buzzer
crease RPM
To activate your memorised configura-
tion:
1. Activate the appliance
2. Select Memory 1 or 2

STARTING A PROGRAMME

S e n s i D r y
Anti- Spun at
Dry Plus Buzzer
crease RPM
To activate the programme touch the
Start/Pause function surface (as shown on
Extra Silent
Memory 1
Memory 2
Delay
Start/Pause
Time Dry
Start
Extra Silent
Memory 1
Memory 2
Delay
Time Dry Start/Pause
Start
Extra Silent
Memory 1
Memory 2
Delay
Time Dry Start/Pause
Start
the illustration above). The LED above be
illuminated in red.
CHANGE A PROGRAMME
To change a programme, push the
On/Off button to deactivate appliance.
Push the On/Off to activate the appli-
ance and then set the programme again.
AT THE END OF PROGRAMME
When the drying cycle is completed, the
symbol flashes on the display. If the
Buzzer function is on, an acoustic signal
sounds intermittently for one minute.
To remove the laundry:
1. Push the Auto/Off button for 2 sec-
onds to deactivate the appliance.
2. Open the appliance door.
3. Remove the laundry.
4.
Close the appliance door.
After each drying cycle:
• clean the filter
• drain the water container
(See chapter CARE AND CLEANING.)
ENGLISH
17