Table of Contents
Advertisement
Everything you need to boot this
motherboard is included in this
Easy Installation Guide. For more
information,
a
complete
User's Manual
can be found in the
Bonus Pack CD
Disc. Thanks for
the help of saving our earth!
80-conductor IDE Cable x 1
Floppy Drive Cable x 1
Bonus Pack CD disc x 1
This Easy Installation Guide x 1
PART NO: 49.89E03.001
DOC. NO: MK73LEN-EG-E0110A
Online
1. Clear CMOS Data
You can clear CMOS to restore system default setting. To
clear the CMOS, follow the procedure below.
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pin 2-3 for a few seconds.
4. Return JP14 to its normal setting by shorting pin 1 & pin2.
5. Connect ATX power cable back to connector PWR2.
1
1
Normal Operation
Clear CMOS
(Default)
2. Installing CPU
1.
2.
3.
CPU socket
Lever
CPU Pin1
Tip: When should I Clear CMOS?
1. Boot fail because of overclocking...
2. Forget password...
3. Troubleshooting...
Pull CPU socket lever and up to 90-degree angle.
Locate Pin 1 on the socket and look for a black dot
or cut edge on the CPU upper left. Match Pin 1 and
cut edge. Then insert CPU into the socket.
Press down CPU socket lever to finish CPU
installation.
Note: If you do not match the CPU
socket Pin 1 and CPU cut edge well,
you may damage the CPU.
Advertisement
Table of Contents
