Table of Contents
Advertisement
Operating instructions
If you are using dishwasher detergent that already contains rinse aid,
it is necessary to deactivate the inflow of rinse aid, in order to avoid a
double dosage.
Deactivation/activation of the inflow of rinse aid
(The dishwasher must be switched off)
When the inflow of rinse aid has been deactivated, the rinse aid
indicator light on the control panel is automatically deactivated.
1. Press the On/Off push button. The On/Off indicator light
illuminates (setting mode).
If a programme push button indicator light is on, this means that
a washing programme has been set. The programme must be
cancelled: press simultaneously the function push buttons 2 and
3 for about 2 seconds.
All the indicator lights will turn off (except for the On/Off indicator
light and eventually salt and the rinse aid indicator lights)
indicating that the setted programme has been cancelled and the
machine is now in setting mode.
2. Press simultaneously function push buttons 2 and 3, until the
indicator lights of the function push buttons 1, 2 and 3 start
flashing.
3. Press the function push button 2, the indicator lights of function
push buttons 1 and 3 turn off while the indicator light of the
function push button 2 goes on flashing, at the same time the
indicator light End of programme illuminates indicating that the
inflow of rinse aid is active.
4. To deactivate the inflow of rinse aid, press the function push button
2 again, the indicator light End of programme turns off,
indicating that the inflow of rinse aid has been deactivated.
5. To memorise the operation, switch off the dishwasher by pressing
the On/Off push button or wait about 60 seconds after which the
dishwasher will automatically return to setting mode.
To activate the inflow of rinse aid follow the above instructions until
the indicator light End of programme illuminates.
16
Hide quick links:
Advertisement
Table of Contents
