Table of Contents
Advertisement
a) Setting manually
1. Open the dishwasher door.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness switch to
position 1 or 2 (see table).
4. Replace the lower basket.
The dishwasher is factory set at
position 2.
b) Setting electronically
(The dishwasher must be switched off)
The dishwasher is factory set at level 5.
1. Press the On/Off push button. The On/Off indicator light
illuminates (setting mode).
If a programme push button indicator light is on, this means that
a washing programme has been set. The programme must be
cancelled: press simultaneously the function push buttons 2 and
3 for about 2 seconds.
All the indicator lights will turn off (except for the On/Off
indicator light and eventually salt and rinse aid indicator lights)
indicating that the setted programme has been cancelled and the
machine is now in setting mode.
2. Press simultaneously function push buttons 2 and 3, until the
indicator lights of the function push buttons 1, 2 and 3 start
flashing.
3. Press the function push button 1, the indicator lights of function
push buttons 2 and 3 turn off while the indicator light of the push
button 1 goes on flashing, at the same time the indicator light
End of programme starts to flash.
The current level is indicated by the number of flashes of the
indicator light End of programme (see chart).
Example: 5 flashes = level 5.
Operating instructions
AA07
11
Hide quick links:
Advertisement
Table of Contents
