Message to Parents Thank you for choosing the Fisher-Price Safe Embrace ® ® Convertible Car Seat. Before you use this car seat, please take time to read and understand this manual completely. It includes important step-by-step instructions on how to properly install this car seat and restrain your child.
WARNING Proper installation and use depends on you! If you do not follow the instructions in this manual and the labels on the car seat, paying particular attention to the warning statements, your child could be at risk of striking the vehicle’s interior during a sudden stop or crash, resulting in serious injury or death.
Page 5
WARNING ALWAYS use the tether strap in the forward-facing position. Your child’s safety is significantly enhanced in the event of a crash if the tether strap is used. The tether strap significantly reduces forward motion of your child’s head during a crash, greatly reducing the likelihood of head injury.
Page 6
WARNING NEVER dress your child in clothing that interferes with positioning the crotch strap between your child’s legs. If the crotch strap is not positioned between your child’s legs, your child could eject from the car seat in a crash. NEVER leave an unsecured car seat in your vehicle.
• Complete the registration card attached to the car seat and mail it in today! • If your vehicle was manufactured in or after 1985, Fisher-Price recommends that you contact ® your vehicle dealer to obtain a tether anchor kit that is specifically designed for your vehicle.
This car seat will ke Tether Strap Attachment Additional belt anchoring car seat directly to your vehicle’s frame, reducing forward motion in an accident and significantly reducing the potential for injury. Energy Absorbing Foam Surrounds your child with an extra layer of protection.
Page 9
The safety features of this Fisher-Price ® car seat will reduce the risk of injury to your child in an accident; however, no car seat can prevent serious injury or death in all accidents.
Selecting a Vehicle Seating Location for Your Car Seat IMPORTANT! • Accident statistics show that children are safer when properly secured in rear vehicle seating locations than in front seating locations. • When installing this car seat in your vehicle for forward-facing use, only use the front seat when no acceptable rear seating location is available.
Page 11
Selecting a Vehicle Seating Location for Your Car Seat Front of Vehicle The rear seating locations preferred. ALWAYS Front of Vehicle use vehicle seats ALWAYS that face the front of the vehicle. NEVER use vehicle seats that face the side of the vehicle.
What Kind of Vehicle Belt System Do You Have? WARNING ALWAYS secure this car seat with your vehicle belt system exactly as described in this manual. Refer also to your vehicle owner’s manual for specific information on your vehicle belt system and specific instructions on how to install a car seat in your vehicle.
NEVER USE These Vehicle Belt Systems NEVER USE Door Mounted Lap and Shoulder Belt Explanation The lap and shoulder belt system is attached to the vehicle’s door and moves when the door is opened. You will not be able to keep the car seat secure.
ONLY USE These Vehicle Belt Systems Manual Lap Belt Explanation The lap belt is tightened by pulling on its free end. Automatic Locking Retractor Lap Belt Explanation The lap belt slack retracts automatically and locks. It can be further tightened by pushing the belt in near the retractor.
Page 15
Rear-Facing Position Birth to 1 Year (6-30 lbs.) Your Safe Embrace Convertible ® Car Seat is color-coded for easy setup, installation and use. Use blue areas on the car seat for the rear-facing position.
Rear-Facing Position Birth to 1 Year (6 -30 lbs.) 5-Point Harness – Shoulder Straps* – Lap Straps Rear-Facing – Crotch Strap Position with Buckle Locking Clip Harness Release Lever Rear-Facing Blue Shoulder Harness Strap Slots Adjustment Strap Seat Position Rear-Facing Position Adjuster Vehicle Belt –...
Setup 5-Point Harness Make sure both shoulder straps are inserted into the buckle. Lift the harness release lever and pull the shoulder straps out as far as you can on the front of the car seat. WARNING NEVER use the upper burgundy shoulder strap slots with a child in the rear-facing position.
Page 18
Setup 5-Point Harness Open the connector bar cover on the back of the car seat. Pull the connector bar up. Remove each shoulder strap from each end of the connector bar, as shown.
Setup 5-Point Harness Lower Blue Middle Blue Slots Slots Place your child in the car seat to select the appropriate lower or middle blue shoulder strap slots. If your child’s shoulders are above the lower blue shoulder strap slots, use the middle blue shoulder strap slots.
Page 20
Setup 5-Point Harness Remove the shoulder straps from the shoulder strap slots (and the chest clip if previously used) on the front of the car seat. Re-insert the shoul- der straps through either the lower or middle blue shoulder strap slots. Make sure the shoulder straps are not twisted.
Page 21
Setup 5-Point Harness Pull the connector bar up on the back of the car seat. Re-attach the shoulder straps to the connec- tor bar. Make sure the shoulder straps are not twisted. Make sure the connector bar strap is not twisted.
Setup Seat Position – Recline REAR-FACING Close the connector bar cover. RECLINE HINT It is easier to close the connector bar cover if you pull the shoulder straps out as far as you can on the front of the car seat. Pull the seat position adjuster down Rotate the seat position adjuster toward the bottom of the car seat...
Installing Your Car Seat in a Vehicle WARNING ALWAYS secure this car seat with your vehicle belt system exactly as described in this manual. Refer also to your vehicle owner’s manual for specific information on your vehicle belt system and specific instructions on how to install a car seat in your vehicle.
Page 24
Installing Your Car Seat in a Vehicle REAR OF VEHICLE Once you have selected an acceptable seating location, place the car seat on the vehicle seat facing the rear of the vehicle. Insert the vehicle belt through the blue vehicle belt opening in the side of the car seat.
Page 25
Installing Your Car Seat in a Vehicle REAR OF VEHICLE Route the vehicle belt out through the blue vehicle belt opening in the other side of the car seat. Buckle the vehicle belt.
Page 26
Installing Your Car Seat in a Vehicle REAR OF VEHICLE For a lap and shoulder belt system: With the vehicle belt buckled, pull the shoul- der belt just until the back of the car seat begins to rise.
Page 27
Installing Your Car Seat in a Vehicle REAR OF VEHICLE For a manual lap belt system: With the vehicle belt buckled, pull the free end of the vehicle belt just until the back of the car seat begins to rise. HINT Some vehicle belt systems have labels with instructions for use with car seats.
Page 28
Installing Your Car Seat in a Vehicle REAR OF VEHICLE REAR OF VEHICLE CORRECT INCORRECT After tightening the vehicle belt system, make sure the base of the car seat is flat on the vehicle seat. If the car seat is sloped toward the vehicle seat back, your child will be too upright, allowing your child’s head to droop forward.
Page 29
Installing Your Car Seat in a Vehicle REAR OF VEHICLE If the base of the car seat is not flat on the vehicle seat, try inserting a rolled bath towel between the vehicle seat and the foot of the car seat. This will raise the foot of the car seat so that the base is flat on the vehicle seat.
Page 30
Installing Your Car Seat in a Vehicle REAR OF VEHICLE If you are using a vehicle seating location equipped with a shoulder belt, you must use rear-facing position locking clip only one on the car seat to prevent the vehicle belt system from loosening during use.
Page 31
Installing Your Car Seat in a Vehicle INCORRECT CORRECT Test your installation by pushing on the top of the car seat. The car seat should NOT easily rotate down. Regularly check to ensure your car seat installation is secure. IMPORTANT! If, after following the instructions “Installing Your Car Seat in a Vehicle”, pages 22-30, steps 1-9, you cannot firmly install the car...
Restraining Your Child Lift the harness release lever and pull the shoulder straps out to loosen the 5-point harness. Press the button on the buckle and remove the shoulder straps from the buckle. HINT The metal and plastic parts of the car seat may become very hot when exposed to the sun.
Page 33
Restraining Your Child Place your child in the car seat. Make sure your child’s lower back is against the car seat back. This will allow you to position the 5-point harness around your child properly. Position the crotch strap between your child’s legs.
Page 34
Restraining Your Child Pull the shoulder straps up to tighten the lap straps. Pull the harness adjustment strap to tighten the 5-point harness. WARNING NEVER dress your child in clothing that interferes with positioning the crotch strap between your child’s legs.
Page 35
Restraining Your Child Check to be sure the shoulder straps are locked into the buckle and securing your child properly. Pull the shoulder straps up and away from your child firmly. The shoulder straps should remain locked in the buckle and should not pull more than one inch (two fingers) away from your child’s chest.
Page 36
Restraining Your Child To remove your child from the car seat: Press the button on the buckle and remove the shoulder straps from the buckle. Slide the shoulder straps off your child’s shoulders and remove your child from the car seat. Insert both shoulder straps into the buckle.
Forward-Facing Position 1 Year and Up (22-40 lbs.) Your Safe Embrace Convertible ® Car Seat is color-coded for easy setup, installation and use. Use burgundy areas on the car seat for the forward-facing position.
Page 38
Forward-Facing Position 1 Year and Up (22- 40 lbs.) 5-Point Harness Forward-Facing – Shoulder Straps* Position Vehicle – Lap Straps Belt Path – Crotch Strap Seat Position with Buckle Adjuster Forward-Facing – Upright for Burgundy Shoulder Forward-Facing Strap Slots Position Tether Strap Harness –...
When the tether strap is fastened to the tether anchor in your vehicle, it will reduce the amount of forward motion your child experi- ences in an accident. Fisher-Price urges you to take the time ® to install a tether anchor in your vehicle.
Page 40
Tether Anchor Installation Tether Anchor Tether Strap • If your vehicle was manufactured in or after 1985, Fisher-Price recommends that you ® contact your vehicle dealer to obtain a tether anchor kit that is specifically designed for your vehicle. Most vehicle manufacturers supply these kits free of charge.
Page 41
Tether Anchor Installation Choose an acceptable vehicle seating loca- tion for your car seat. Follow the instructions, “Selecting a Vehicle Seating Location for Your Car Seat”, pages 9 and 10, for general infor- mation on choosing a vehicle seating location. To determine the seating location that provides a tight fit for your car seat, pre-install the car seat in your vehicle.
Page 42
Tether Anchor Installation 2-Door and 4-Door Car Bolt Distance from top of Anchor car seat and hole is at least 8". Washer Lock Nut If a pre-drilled hole does not exist, you will have to drill a " hole. (Be sure to wear appropriate eye protection when drilling.) Make sure the hole is at least 8"...
Page 43
Tether Anchor Installation Van, Hatchback, Station Wagon, Sport Utility Vehicle Bolt Anchor Hole is 4" behind 4" vehicle seat and still accessible by tether strap. Washer Lock Nut If a pre-drilled hole does not exist, you will have to drill a "...
Page 44
Tether Anchor Installation Pick-Up Truck Lock Nut Washer Distance from top of vehicle seat and hole is at least 8". Anchor Bolt 3" 3" Car Seat Center Line If a pre-drilled hole does not exist, you will have to drill a "...
Setup 5-Point Harness Make sure both shoulder straps are inserted into the buckle. Lift the harness release lever and pull the shoulder straps out as far as you can on the front of the car seat. WARNING NEVER use the lower or middle blue shoulder strap slots with a child in the forward-facing position.
Page 46
Setup 5-Point Harness Open the connector bar cover on the back of the car seat. Pull the connector bar up. Remove each shoulder strap from each end of the connector bar, as shown. Remove the shoulder straps from the front of the car seat.
Page 47
Setup 5-Point Harness Position the chest clip pieces so that the buckle and tongue face each other. Fasten the chest clip. Thread a shoulder strap through one side of the chest clip, as shown. Make sure the shoulder strap is not twisted. Repeat this procedure to thread the other shoulder strap through the other side of the chest clip.
Page 48
Setup 5-Point Harness Re-insert the shoulder straps into the upper burgundy shoulder strap slots. Unfasten the chest clip. IMPORTANT! If you are converting the car seat from rear- facing use to forward-facing use, REPOSI- TION THE SHOULDER STRAPS IN THE UPPER BURGUNDY SHOULDER STRAP SLOTS AND ATTACH THE CHEST CLIP.
Page 49
Setup 5-Point Harness Pull the connector bar up on the back of the car seat. Re-attach the shoulder straps to the connec- tor bar. Make sure the shoulder straps are not twisted. Make sure the connector bar strap is not twisted. Close the connector bar cover.
Setup Seat-Position – Upright Pull the seat position adjuster down . Rotate the seat position adjuster toward Make sure the seat position FORWARD- FACING adjuster is in the upright position. UPRIGHT...
Installing Your Car Seat in a Vehicle WARNING ALWAYS secure this car seat with your vehicle belt system exactly as described in this manual. Refer also to your vehicle owner’s manu- al for specific information on your vehicle belt system and specific instructions on how to install a car seat in your vehicle.
Page 52
Installing Your Car Seat in a Vehicle FRONT OF VEHICLE Once you have selected an acceptable seat- ing location and have installed the tether anchor, place the car seat on the vehicle seat facing the front of the vehicle. Route the vehicle belt over the bend in the burgundy tube, against the connector bar cover on the back of the car seat and then over the bend in the burgundy tube on the...
Page 53
Installing Your Car Seat in a Vehicle FRONT OF VEHICLE Buckle the vehicle belt.
Page 54
Installing Your Car Seat in a Vehicle FRONT OF VEHICLE For a lap and shoulder belt system: With the vehicle belt buckled, push down on the car seat with your knee and pull the shoulder belt for the tightest possible fit.
Page 55
Installing Your Car Seat in a Vehicle FRONT OF VEHICLE For a manual lap belt system: With the vehicle belt buckled, push down on the car seat with your knee and pull the free end of the vehicle belt for the tightest possible fit.
Page 56
Installing Your Car Seat in a Vehicle FRONT OF VEHICLE If you are using a vehicle seating location equipped with a shoulder belt, you must use only one forward-facing position locking clip on the car seat to prevent the vehicle belt system from loosening during use.
Page 57
Installing Your Car Seat in a Vehicle TO REMOVE Attach the tether strap hook to the tether anchor. Pull the free end of the tether strap to tighten. Fold or roll the excess tether strap and tuck it between the car seat and the vehicle seat. Note: To remove the tether strap from the tether anchor, lift the tab on the adjuster to loosen the tether strap.
Page 58
Installing Your Car Seat in a Vehicle INCORRECT CORRECT Test your installation of the car seat by rocking the car seat forward and backward. You should NOT be able to pull the back of the car seat away from the vehicle seat more than one inch.
Restraining Your Child Lift the harness release lever and pull the shoulder straps out to loosen the 5-point harness. Press the button on the buckle and remove the shoulder straps from the buckle. HINT The metal and plastic parts of the car seat may become very hot when exposed to the sun.
Page 60
Restraining Your Child Place your child in the car seat. Make sure your child’s lower back is against the car seat back. This will allow you to position the 5-point harness around your child properly. Position the crotch strap between your child’s legs.
Page 61
Restraining Your Child Pull the shoulder straps up to tighten the lap straps. Pull the harness adjustment strap to tighten the 5-point harness. WARNING NEVER dress your child in clothing that interferes with positioning the crotch strap between your child’s legs.
Page 62
Restraining Your Child Buckle the chest clip.
Page 63
Restraining Your Child Position the chest clip so that it is in line with your child’s armpits.
Page 64
Restraining Your Child Check to be sure the shoulder straps are locked into the buckle and securing your child properly. Pull the shoulder straps up and away from your child firmly. The shoulder straps should remain locked in the buckle and should not pull more than one inch (two fingers) away from your child’s chest.
Page 65
Insert both shoulder straps into the buckle. The safety features of this Fisher-Price ® car seat will reduce the risk of injury to your child in an accident; however, no car seat can prevent serious injury or death in all accidents.
• If you have any questions about installation or proper use, or would like to order replacement parts for the Safe Embrace Convertible Car Seat, please ® call Fisher-Price Consumer Affairs toll-free at ® 1-800-432-KIDS, between 8 AM and 5 PM EST, Monday through Friday. Hearing-impaired con- sumers using TTY/TDD equipment, please call 1-800-382-7470.
Aircraft Use You can install this car seat in aircraft seats that face forward. Before bringing the car seat on board: • Notify the airline of your intent to bring this car seat on board. The airline may have restrictions regard- ing its use.
(located on the back of the seat back) to: Fisher-Price, Inc., 636 Girard Avenue, East Aurora, New York 14052, or call 1-800-432-KIDS. For recall information, call the U.S. Government’s Auto Safety Hotline at 1-800-424-9393...
Cleaning and Washing From the front of the car seat, lift the harness release lever and pull the shoulder straps out as far as you can. From the back of the car seat, open the connector bar cover. Pull the connector bar out and up. Remove each shoulder strap from each end of the connector bar.
Page 70
Cleaning and Washing To clean the car seat shell and 5-point harness, use a mild cleaning agent and damp cloth. Rinse with clean water to remove soap residue. Clean the inside of the buckle with a mild soap and water solution. Run warm water into the buckle to remove residue.