Setup; Memory 1, 2, 3 - AEG REGINA 1580 User Information

Setup

The special functions that can be set under Setup remain permanently
stored independent of each washing cycle - even after the appliance
has been switched off or the main plug has been removed from the
socket.

Memory 1, 2, 3

Programme combinations can be stored at programme knob positions
MEMORY 1, 2, 3 and can then be selected directly using the
programme knob. To do this, the desired programme combination is
first put together and then stored.
Setting the memory
Example : programme
MEMORY 1 is to be given the
following
combination : LINEN/EASY CARES,
40°C, 800 rpm, with PREWASH.
1. Turn the programme knob to
LINEN /EASY CARES (COTON/
SYNTH).
2. Press the TEMP key (TEMP.°C) repeatedly, until 40°C appears in the
display.
3. Press the RPM key (T/MIN) repeatedly, until 800 appears in the
display.
4. Using the OPTION key set PREWASH
black bar appears under the PREWASH symbol
5. Press the OPTION key repeatedly, until the SETUP symbol
flashes.
6. Press the OK key. The display
changes to the Special Functions
level. Programme memory position
MEMORY 1 is offered first.
To change to another memory
position, press the OPTION key .
7. Press the OK key. The programme combination is now stored to
programme knob position MEMORY 1 and in the future can be
selected directly using the programme knob.
position
LINEN/EASY CARES
Cycle end at
programme
800
40°C
TEMP. °C T/MIN
and press the OK key. A
Memory 1
Store program ?
TEMP. °C T/MIN
User information
12.45
14.37
OPTION OK TEMPS
.
OPTION
OK TEMPS
19