What To Do If; Remedying Faults - AEG LAVAMAT WSOFT 12 User Information

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of
the information provided here. If you call Customer Service to deal
with one of the faults listed here or to remedy an operating fault, the
customer service technician's visit will not be free of charge, even dur-
ing the warranty period.
Problem
The washing machine
does not work.
The door cannot be
closed.
The machine does not
take in water.
Excessive foaming dur-
ing the main wash.
Possible Cause
The mains plug is not
plugged in.
The circuit breaker at the
household power distribu-
tion box has tripped or a fuse
at the household fuse box
has blown.
The door is not correctly
closed.
The child safety feature is
set.
The door is not correctly
closed.
Water tap is closed.
Filter in screw connection of
the inlet hose is blocked.
Water tap is blocked with
limescale or is faulty.
Too much detergent was
probably used.
Instructions for use
Remedy
Plug in the mains plug.
Re-set the circuit breaker or
replace the fuse.
Close the door; The lock must
engage audibly.
Cancel the child safety fea-
ture (see the section "Child
Safety Feature").
Close the door; The lock must
engage audibly.
Turn on the water tap.
Close the water tap. Unscrew
the hose from the water tap,
remove the filter and clean it
under running water.
Check water tap and have it
repaired if necessary.
Use the exact quantities rec-
ommended by the detergent
manufacturer.
29