Prior To Initial Use - Balance KH 5510 Instructions For Use Manual

screws. Take note that there should be no im-
pediments between the scales and the infrared
receiver of the display remote control. Other-
wise it could malfunctions with the display re-
mote control.
If you wish to secure the wall holder with the
plugs and screws, with the assistance of the
wall holder transfer the correct distance be-
tween the boreholes to the wall. Small drilling
mistakes can be evened out with the help of
the slotted holes.
†
Danger!
Please make sure no water or moisture can
enter the scales or display remote control unit.
Otherwise the scales and display remote con-
trol unit can be damaged beyond repair. Th is
could also cause danger of electric shock!
|
Warning!
Do not place the scales and display remote con-
trol unit in the immediate vicinity of heat sourc-
es such as ovens, heaters and other similar de-
vices. Otherwise the scales and display remote
control unit can be damaged beyond repair.
Th e scales and display remote control unit can
only be operated at temperatures between °
and ° Celsius. Th e scales should be kept with-
in this temperature range even while not being
used. Temperatures outside of this range can re-
sult in malfunctioning or long-term damages.

8. Prior to initial use

Before using the scales for the fi rst time, you
should enter your personal data. Ten memory
locations are available for storing your per-
sonal data. To store your personal data:
8
IB KH5509-10 UK.indb EN8 IB KH5509-10 UK.indb EN8
1
Take the display remote control unit in
your hand and press the on/off button
once. "Balance" will be displayed moving
across the screen.
2
Press and hold the i button until - is
displayed on the screen. As soon as you
release the i button, the number of one
of the ten memory locations will be dis-
played on the screen.
3
You can choose one of the other ten
memory locations by pressing the up and
down buttons.
4
Press the i button as soon as the desired
memory location is displayed on the
screen. Now either lb or kg will blink on
the display screen.
5
Press the up and down buttons to switch
between ...
Ú
weight display in kg and height display in
cm according to the metric system and
Ú
weight display in lb (pounds) and height
display in feet and inches according to
the British measurement system.
Once the desired display mode (lb or kg)
is displayed, press the i button.
6
Now the symbol for woman or the sym-
bol for man will appear on the display
screen. You can switch between the two
symbols by pressing the up and down
buttons. Select appropriate symbol by
pressing the i button.
7
"Age" will be displayed and a number bet-
ween  and  will blink on the screen.
Choose the number corresponding to
your age by pressing the up or down but-
tons. Upon entering an age ...
09.01.2006 16:12:26 Uhr 09.01.2006 16:12:26 Uhr