Yamaha TW125 Owner's Manual page 43

1 2
1. Strainer
2. Compression spring
3. O-ring
cC
When removing the oil drain bolt,
the O-ring, compression spring,
and oil strainer will fall out. Take
care not to lose these parts.
PERIODIC MAINTENANCE AND MINOR REPAIR
3
1
1. Bolts ( 3)
2. Engine oil drain bolt
NOTE:
EC000070
The oil filter cover is secured by
two screws and a drain bolt.
Remove the drain bolt to drain the
filter cavity.
2
1. Oil filter element
2. O-ring
NOTE:
Make sure the O-ring is seated
properly.
6-11
2
1
4. Remove the filter cover screws
and the oil filter cover.
5. Remove the oil filter element
and O-ring.
6. Clean the oil filter and strainer
with solvent. Replace if neces-
sary.
7. Check the O-rings. If damaged,
replace.
8. Install the filter cover, screws
and drain bolts. Tighten the
drain bolts to the specified
tightening torques.
1
2
3
4
5
6
7
8
9