Rear Wheel - Yamaha Fazer FZS600 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
8. Bind the speed sensor lead and
the brake hose together with the
plastic fastener.
9. Tighten the wheel axle, front
wheel axle pinch bolt and brake
caliper bolts to the specified
torques.
Tightening torques:
Wheel axle:
67 Nm (6.7 m·kgf)
Front wheel axle pinch bolt:
20 Nm (2.0 m·kgf)
Brake caliper bolt:
6
40 Nm (4.0 m·kgf)
1. Axle nut
2. Drive chain slack adjusting nut
3. Locknut

Rear wheel

To remove the rear wheel
WARNING
_
G
It is advisable to have a Yamaha
dealer service the wheel.
G
Securely support the motorcy-
cle so that there is no danger of
it falling over.
_
1. Loosen the axle nut and the brake
caliper bolts.
6-41
1. Bolt (× 2)
2. Brake caliper bracket
3. Brake torque rod
4. Brake torque rod nut
EAU04378
5. Brake caliper
2. Disconnect the brake torque rod
from the brake caliper by removing
the nut and the bolt.
EW000122
3. Place the motorcycle on the cen-
terstand.
4. Remove the axle nut and the
brake caliper by removing the
bolts.
CAUTION:
_
Do not apply the brake after the
brake caliper has been removed,
otherwise the brake pads will be
forced shut.
_
ECA00082