Helmet Holder; Adjusting The Shock Absorber Assembly - Yamaha DT125R Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
3
1. Open.

Helmet holder

To open the helmet holder, insert the
key into the lock, and then turn the
key as shown.
To lock the helmet holder, turn the
key to the original position, and then
remove it.
w
Never ride with a helmet attached
to the helmet holder, since the hel-
met may hit objects, causing loss
of control and possibly an acci-
dent.
Adjusting the shock
absorber assembly
This shock absorber assembly is
equipped
adjusting nut.
1
cC
Never attempt to turn an adjusting
mechanism beyond the maximum
or minimum settings.
EAU00261
EW000030
EAU03591
with a spring preload
EC000015
3-12
b
a
2
1
1. Locknut
2. Adjusting nut
Adjust the spring preload as follows.
1. Loosen the locknut.
2. To increase the spring preload
and thereby harden the suspen-
sion, turn the adjusting nut in
direction a. To decrease the
spring preload and thereby soft-
en the suspension, turn the
adjusting nut in direction b.