How To Store Frequencies In Memory - Azden PCS-6000H Instruction Manual

How To Store Frequencies in Memory:

—Setting Receive Frequency and Tone Code Entry —
a) Pressing the function (F) key and the program (PROG) key will set the unit in the program mode
and the 'AD' blinks and indicates that you can write frequency in the MAO (memory bank A,
address channel 0).
b) Select the memory address desired from among 0 through 9 by the UP or DOWN key.
c) Press the M MODE key and you will see that the receiving frequency display flickers.
d) Select a frequency to be stored by using the UP, DOWN, and F keys.
e) Push the M MODE key and then the frequency will be stored in the specified memory.
f) — Sub—audible Tone Code Entry—: After the e) procedure above, you will see that the TONE
indicator flickers for tone code entry. Tone code can be selected by the UP/DOWN key. Tone code
entry is completed by pressing the M MODE key. (An optional tone squelch unit is required).
Note: When the unit is provided with an optional tone squelch unit, refer to the tone squelch unit
code table.
—Setting Transmit Frequency and Tone Code Entry —
a) After the above tone code entry completion, you will see that the transmit indicator (TX) and
transmit frequency flicker. In this case, the frequency displayed is the same as that of the receiving
frequency.
b) Just push the M MODE key when you want both the transmit and receive frequency to be the
same.
But if you want to set a different transmit frequency from the receive frequency, select the
desired transmit frequency by using the UP, DOWN, and 'F' key and then press the M
MODE key to complete the transmit frequency entry in the memory.
c) You will see then that both the TONE indicator and TX indicator flickers r s.
d) Select the tone code desired by the UP/DOWN key. Refer to the PL TONE CODE table as
below and the option tone squelch unit table when the unit provided with the tone squelch unit.
Code Freq.(Hz)
01 67.0
02 71.9
03 74.4
04 77.0
05 79.7
06 82.5
07 85.4
08 88.5
09 91.5
10 94.8
11 97.4
12 100.0
13 103.5
14 107.2
15 110.9
Note: When the unit is provided with an optional tone squelch unit, tone codes are
different from above and refer to the tone the squelch unit code table.
Note*: Shifted frequency is displayed when the shift is set to + or —
before the unit is set in the program mode.
— Tone Code Table —
Code Freq.(Hz)
16 114.8
17 118.8
18 123.0
19 127.3
20 131.8
21 136.5
22 141.3
23 146.2
24 151.4
25 156.7
26 162.2
27 167.9
28 173.8
29 179.9
30 186.2
Code Freq.(Hz)
31 192.8
32 203.5
33 210.7
34 218.1
35 225.7
36 233.6
37 241.8
38 250.3
39 500
40 600
41 700
42 800
43 900
44 1,000
45 1,600
—8—
Code Freq.(Hz)
46 1,700
47 1,750
48 1,800
49 1,300
50 2,000
51 2,200
52 2,975
53 2,550
54 2,295
55 2,125
56 1,275
57 1,445