Front Wheel (Fz1-N) - Yamaha FZ1-N Owner's Manual

a jack either under each side of the
frame in front of the rear wheel or under
each side of the swingarm.
PERIODIC MAINTENANCE AND ADJUSTMENT

Front wheel (FZ1-N)

WARNING
For the ABS model, have a Yamaha
dealer remove and install the wheel.
To remove the front wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the front wheel axle pinch
bolt, then the wheel axle and the
brake caliper bolts.
1. Front wheel axle pinch bolt
2. Wheel axle
6-36
EAU44790 2. Lift the front wheel off the ground
according to the procedure on
EWA14840
page 6-35.
3. Remove the brake hose holder on
each side by removing the bolt and
nut.
4. Remove the brake caliper on each
side by removing
EAU39392
NOTICE: Do not apply the brake
EWA10821
after the brake calipers have
been removed, otherwise the
brake pads will be forced shut.
[ECA11051]
1. Brake hose holder
2. Bolt and nut
3. Brake caliper bolt
4. Brake caliper
5. Pull the wheel axle out, and then
remove the wheel.
the bolts.
6