Replacing The Tail/Brake Light Bulb; Replacing A Turn Signal Light Bulb - Yamaha FZ1-N Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
1. Headlight bulb holder
2. Headlight bulb
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
6 5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the bolts.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
Replacing the tail/brake light
bulb
1. Remove the passenger seat. (See
page 3-19.)
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
1. Tail/brake light bulb socket
3. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
4. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the passenger seat.
6-33
EAU24114
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
EAU24204
[ECA11191]