Automax - AEG Electrolux FM 6520K-an Instruction Book

Automax

With AUTOMAX you do not need
to turn down the temperature. When
using AUTOMAX the zone gets full
heat for a certain amount of time
where after the cooking zone auto-
matically adjusts to the setting you
have chosen.
To adjust AUTOMAX you have to
do the following:
k
1. Turn on the hob, push .
2. Adjust the desired cooking zone
at the setting you wish to use.
N
3. Push .
When AUTOMAX is coded the con-
trol lamp for "A" will light up.
To turn off AUTOMAX, you have to
N
push .
The "AUTOMAX" chart on the fol-
lowing page gives guidelines for
suitable heat settings for
different types of cooking.
12
Mounting:
When mounting several hobs together you must use a reinforcement beam
between each hob as well as the silicone supplied with the hobs (see fig.)
1. Cut a hole of the calculated size in the table top
2. Place the individual hobs upside down on a mat. Take care that the top side is
not scratched.
3. Mount the clamping fittings in the holes in the side of the base panels (see
fig.)
4. Place the first hob in the hole.
5. Apply silicone to the two corners joining the next hob (see fig.)
Use only the silicone supplied with the hobs as this is intended to tolerate the
high temperatures of the appliance.
6. Push a reinforcement beam up against the hob. Apply silicone on the rein-
forcement beam (see fig.)
7. Tighten the clamping fittings to the table top using a screwdriver.
8. Repeat the process for the other hobs.
Silicone
25