Table of Contents
Advertisement
To optimise joints between the installed hobs, the gap between the ceramic hob
may be grouted with silicone:
1. Remove the aluminium panels from the hobs.
2. Apply a stripe of silicone to the gap between the two ceramic hob. Use only
the silicone supplied, as it is designed to tolerate the appliance's high temper-
ature. (Fig. 1)
3. Splash a little soapy water (washing-up liquid) on the silicone stripe
4. Press the rubber block hard against the ceramic hob and pull it slowly from
back to front (Fig. 2)
5. Leave the silicone to harden until the next day.
6. Remove surplus silicone coating from the ceramic hob with the razorblade
supplied. Be careful not to damage the silicone in the gap. Run tools only
along the joint, never across it.
7. Polish the ceramic hob with the supplied cleaning product for ceramic hobs.
1
2
26
Double Cooking Zone
In order to activate the double cook-
ing zone you have to do the follow-
ing:
k
1. Turn on the hob, push
.
2 Adjust the cooking zone, push
l
m
or
.
1
3. Push
.
To deactivate the double cooking
1
zone push
.
Residual Heat Indicator
Each cooking zone has a residual
heat indicator. When the cooking
zone is turned off the "H" is lit up in
the display until the cooking zone
has cooled. "H" is a warning that the
cooking zone is still hot.
11
Advertisement
Table of Contents
