Troubleshooting - Honeywell Dolphin 7600 User Manual
Mobile computer with windows mobile 6
Hide thumbs
Also See for Dolphin 7600:
- User manual (142 pages) ,
- Quick start manual (12 pages) ,
- Supplementary manual (4 pages)
Table of Contents
Advertisement
Troubleshooting
If you encounter problems, refer to chart below for possible solutions. If problems persist, please contact
Technical Assistance
Problem
The Status LED does not come on
when I insert a battery pack into a
slot.
The Status LED lights red during
charging.
The Status LED lights red and stays
on without a battery in the charging
slot.
12 - 6
(see page 15-1).
Issue
Check the power connections; make sure the POWER switch is
ON and the battery pack is properly seated.
Try to charge the battery in one of the other charging slots. If the
red Status LED comes on again, then the problem is associated
with the battery pack. If the red status stays with the charging slot,
the problem is associated with the charging circuitry.
An error occurred during the self-diagnostic test for that particular
charging pocket. Call Honeywell
to request an RMA.
Limited Warranty
(see page 15-3)
Advertisement
Table of Contents
