Chapter 2 - Getting Started; Out Of The Box - Honeywell Dolphin 7600 User Manual

2
Getting Started

Out of the Box

Verify that your carton contains the following items:
• Dolphin 7600 mobile computer (the terminal)
• Main battery pack (3.7v, Li-ion)
• AC power supply
• Localized plug adapters
• User CD
Note: Be sure to keep the original packaging in case you need to return the Dolphin terminal for service; see
Warranty on page
Step 1. Install the Main Battery
We recommend use of Hand Held Products Li-Ion battery packs. Use of any non-Hand Held
Products battery may result in damage not covered by the warranty.
Step 2. Charge the Batteries
Dolphin terminals ship with both the main battery
pack and internal backup battery significantly
discharged of power. Charge the main battery
pack with the charging cable for a minimum of
four hours before initial use.
1. Attach the appropriate plug adapter to the
plug of the power cable.
2. Plug the *power cable into the
(see page 3-12) on the left side.
3. Insert the plug into the appropriate power
source.
*This power cable can also be used to power the
Dolphin HomeBase Device
We recommend use of Hand Held Products peripherals, power cables, and power adapters. Use of any non-
Hand Held Products peripherals, cables, or power adapters may cause damage not covered by the warranty.
15-3.
DC Power Jack
(see page 11-1).
1
Power Cable
2
Limited
2 - 1