AEG COMPETENCE B8831-4 Operating Instructions Manual page 23

3
How to use the clock functions
• After a clock function has been selected, the corresponding function
flashes for about 5 seconds. During this period, the desired times can
be set or modified using the
• When the desired time has been set, the function continues to flash
for approx. 5 seconds. After that the function is then lit. The set time
begins to run.
3
Checking the time set or remaining
Press the Selection
function flashes and the time set or remaining is displayed.
2
Using residual heat with the Cook time
functions
When the Cook time
oven switches the heating elements off, when 90% of the time set or
calculated has elapsed. The residual heat present is used to continue
the cooking process until the time set has elapsed (3 to 20 mins.).
or
button repeatedly, until the appropriate clock
and End time
button.
and End time
clock functions are used, the
clock
23