Automatic Switching On And Off; Checking Automatic Function Entries - AEG COMPETENCE B 8100 Operating Insructions

Automatic Switching On and Off

For automatic switching on and off both the duration and the end of
the cooking time must be entered. In the following instructions, the
duration is set first and then the end of the cooking time. The settings
can however be made in the reverse order.
0 1. If necessary, switch on the appliance using the mains button.
2. Select an oven function. Change the suggested temperature if neces-
sary.
3. Press the clock W button until the function indicator is at COOK TIME.
The temperature/time display indicates "0.00".
4. Within 5 seconds press the + button until the required duration is dis-
played.
5. Press the clock W button until the function indicator is at END COOK.
The temperature/time display shows the calculated end of the cooking
time if cooking were to start immediately.
6. Within 5 seconds press the + button until the time at which cooking is
to end is displayed.
After approx. 5 seconds the function indicator switches from flashing
to continuous illumination.
Both the COOK TIME and END COOK function indicators have now
switched to continuous illumination. The clock is now set to switch the
oven on and off automatically.
The oven switches on automatically at the calculated start time. When
the end of the cooking time is reached, the oven switches off automat-
ically and an acoustic signal sounds for approx. two minutes.
7. Press the clock W button to switch off the signal.
8. If necessary, switch off the appliance using the mains button.

Checking Automatic Function Entries

Using the clock W button select the COOK TIME or END COOK func-
0
tion.
The corresponding function indicator starts to flash. The "Temperature/
Time Display" shows the remaining cooking time or the time entered
for the end of cooking.
Operating Instructions
23