Problems Occur During Use Of The Dishwasher; The Wash Results Are Not Satisfactory - AEG FAVORIT 60830 User Instructions

Operating Instructions

...problems occur during use of the dishwasher.

Malfunction
The programme does
not start.
Rust spots are visible in
the washing compart-
ment.
There is a whistling
noise during washing.

...the wash results are not satisfactory.

The dishes are still dirty.
– The wrong wash programme was selected.
– The dishes were loaded is such a way that the wash waster did not
reach all items. The racks for the dishes must not be overloaded.
– The filter in the base of the washing compartment is dirty or incor-
rectly positioned.
– Detergent was not used or too little was used.
– In the case of scale deposits on the dishes: The special salt container
is empty or the water softener is incorrectly adjusted.
– The drain hose is incorrectly laid.
38
Possible Cause
The door of the dishwasher is
not closed properly.
Mains plug is not plugged in. Insert mains plug.
House fuse is defective.
In the case of dishwasher
models with start delay
timer:
A start delay is selected.
The washing compartment is
made from rust-free stainless
steel. Rust spots in the
washing compartment are
due to rust particles from
external sources (rust partic-
les from water pipes, pans,
cutlery, etc.). Remove such
spots with one of the stain-
less steel cleaners that are
generally available on the
market.
The whistling is not a cause
for concern.
Remedy
Shut the door.
Replace fuse.
If dishes are to be washed
immediately cancel delay
start timer.
Only wash cutlery and dis-
hes that are suitable for dis-
hwasher use.
Close the lid of the special
salt container securely.
Use a different brand of
detergent.