Malfunction
The FILTER indicator
continuously illuminated.
After remedying the FILTER error
After rectifying an Å 10 or Å 20 error, press the button for the dishwa-
shing cycle that has been started. The dishwashing cycle will continue.
If the fault is displayed again, please contact customer service.
For all other errors displayed, please contact customer service, stating
3
the error code. (See chapter "Customer Service").
Possible cause
The FILTER indicator
is only intended to remind
you to occasionally check
the dishwasher's filter and
j
is
to clean it out when neces-
sary. It becomes illuminated
at regular intervals, regard-
less of the state of cleanli-
ness of the filter.
Operating Instructions
j
The indicator goes out
automatically at the
start of the next dish-
washing cycle.
, shut the door.
j
Remedy
37