Table of Contents
Advertisement
Combination Switch
1.
Low beam (exterior lamp
switch position
2.
High beam (exterior lamp
switch position
3.
High beam flasher (high beam
available independent of
exterior lamp switch position)
4.
Turn signals, right
5.
Turn signals, left
To signal minor directional changes,
such as changing lanes on a highway,
move combination switch to the point
of resistance only and hold it there.
)
To operate the turn signals
continuously, move the combination
)
switch past the point of resistance (up
or down). The switch is automatically
canceled when the steering wheel is
turned to a large enough degree.
6.
Press switch briefly:
One wipe without washer water
(select only if window is wet)
Press switch past resistance
point:
Windshield washer, windshield
wiper; headlamp cleaning system
(only in exterior lamp switch
positions
or
Canada only: also in position
when the engine is running)
7.
Windshield wiper
O
Wiper off
I
Intermittent wiping
II
Normal wiper speed
III
Fast wiper speed
When coming to a stop or driving
slower than approx. 20 km/h (13
mph), the wiper speed
automatically switches to the
next lower setting.
In setting "I", the interval be-
tween wipes is lengthened.
Upon accelerating again, the
wiper speed returns to the
previous setting.
Note:
The windshield washer reservoir,
hoses and nozzles are automatically
heated.
.
52
Advertisement
Table of Contents
