MIXER PAGE
The Mixer page (automatically selected at the startup) allows you to adjust the Volume,reverb, chorus and panpot for
each real-time part (UPPER1, UPPER2, LOWER, MANUAL BASS, MELODY INTELLIGENT and D-BEAM). You can set the part
ON or OFF.
Adjusting the Volume for Each Part
1.
Use the sliders to adjust the Volume for each real-time part . See
The tone name for each part is vertically displayed at the left of each slider.
The name of the function assigned to the D-BEAM is vertically displayed at the left of its slider.
Adjusting the Reverb, Chorus and Panpot for Each Part
1.
Use the knobs to adjust the Reverb, Chorus and Panpot . See
Switching a Part ON/OFF
1.
Use the buttons to switch the desired part ON/OFF . See
8
"Slider operation" (p. 7).
Tones/D-BEAM Function
"Knob operation" (p.
7) .
"Button Operation" (p.
7) .