Parts Editor Page - Roland BK-9 Performance Editor User Manual

PARTS EDITOR PAGE
In this page you can change tones and edit the parameters for each real time part.
Changing the Tone for Each Part
1.
Press a [TONE] button to open the Tone page of the desired part .
The following page appears:
2.
Select the tone you like .
To select your desired tone you can search either by Tone Families (use the [FAMILY] button) or by Tone Names (use the
[NAME] button). The chosen tone name is shown vertically at the left of each slider.
Moreover you can mark some of the available Tones as your favorite ones; to do it, just
a.
Press the star icon in the corresponding tone name line.
The star icon becomes bright. Of course, you can mark several tones as your favorite ones and they can belong to either one or several different
families.
b.
Press the [NAME] button and the star icon in the right top corner of the screen page, if you wish to see a list of all your favorite
tones and select only one of them.
c.
Press the [FAMILY] button and the star icon in the right top corner of the screen page, if you wish to see a list of all your favorite
tones belonging to that precise family and select only one of them.
NOTE
All favorite Drum Sounds are grouped together at the end of the overall favorite list.
3.
Press the [BACK] button to return to the Parts Editor page .
NOTE
Harmonic bar sounds (i.e. any of the available organ sounds having different footages) are not affected by
BK-9 Performance Editor. So, if any of them is selected the related controls are disabled.
11