Gigabyte GA-8I915MD-GV User Manual page 37

CPU Hyper-Threading
Enabled
Disabled
Limit CPUID Max. to 3
Enabled
Disabled
No-Execute Memory Protect
Enabled
Disabled
CPU Enhanced Halt (C1E)
Enabled
Disabled
CPU Thermal Monitor 2 (TM2)
Enabled
Disabled
CPU EIST Function
Enabled
Disabled
On-Chip Frame Buffer Size
1MB
4MB
8MB
16MB
32MB
(Note) This item will show up when you install a processor that supports this function.
Enables CPU Hyper Threading Feature. Please note that this feature is only
working for operating system with multi processors mode supported. (Default
value)
Disables CPU Hyper Threading.
Limit CPUID Maximum value to 3 when use older OS like NT4.
Disables CPUID Limit for windows XP.(Default value)
(Note)
Enable No-Execute Memory Protect function.(Default value)
Disable No-Execute Memory Protect function.
(Note)
Enable CPU Enhanced Halt (C1E) function.(Default value)
Disable CPU Enhanced Halt (C1E) function.
(Note)
Enable CPU Thermal Monitor 2 (TM2) function.(Default value)
Disable CPU Thermal Monitor 2 (TM2) function.
(Note)
Enable CPU EIST function.(Default value)
Disable CPU EIST function.
Set On-chip frame buffer size to 1MB.
Set On-chip frame buffer size to 4MB.
Set On-chip frame buffer size to 8MB. (Default value)
Set On-chip frame buffer size to 16MB.
Set On-chip frame buffer size to 32MB.
- 37 - BIOS Setup