Connection Diagram - Fortec Star Lifetime User Manual

OVERVIEW 1

4. CONNECTION DIAGRAM

1) Receiver to TV with RF output and terrestrial antenna:
Connect the TV antenna to the ANT IN socket of the receiver.
Connect the TV out of the receiver to the RF INPUT of the TV set.
Search on the TV set for UHF Channel 38 (for Europe), or channel VHF channel 3 or
4 for North America.
Channel 38 is set at factory for UHF.
If needed, you can change it in the User Set-up Menu mode.
2) Receiver to VCR and then to TV with RF output:
Connect the TV antenna to the ANT IN socket of the receiver if a Terrestrial antenna
is also needs to be connected.
Connect the TV output Socket of the receiver to the RF IN of the VCR.
Connect the RF output of the VCR to the RF IN of the TV set.
Search on the VCR for UHF channel 38 (for Europe), or channel VHF channel 3 or 4
for North America.
Note:
USE different UHF channels for VCR and receiver.
9