System Setup - Fortec Star Lifetime User Manual

2 OPERATION
6. Systems Setup
6.1 Parental Control
The factory set default Password is "0-0-0-0".
6.1.1 Change PIN Code
You can change the PIN Code (Password), if you want to.
1) Enter the Old password. If you enter this mode for the first time after
purchasing the receiver, the OLD PIN Code is the default password.
2) Enter the new password.
3) Re-enter the new password to confirm.
Warning! You must remember the exchange password because it is used for
several functions. The Password is required:
• To view parental locked channels.
• To reset the receiver to the factory settings.
6.2 S/W Transfer From Receiver to Receiver
1) Connect the Master receiver to the Slave receiver using a RS-232 Female-to
female Nul modem Cable. Pin configuration is shown below.
2) Select the s/w transfer mode using ◄► keys.
24