Samsung SCO-2081R Series User Manual page 23

DAY/ NIGHT
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select 'DAY/NIGHT' by using the Up
and Down buttons so that the arrow indicates 'DAY/NIGHT'.
2. Select a desired mode using the Left and Right buttons according to the picture display
you want.
 AUTO : The mode is switched to 'Color' in a normal environment, but switches to
'B/W' mode when ambient illumination is low. To set up the switching time
for AUTO mode, press the Function Setup switch. You can turn on or off
the burst signal on B/W mode.
- BURST MODE :
burst signal on B/W mode.
- DURATION : You can select the brightness
level at which the camera switches from day
to night mode.
- DWELL TIME :
time about changing the day/night mode.
→3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
 exTeRN : Ground to the grounding terminal to allow automatic switching between COLOR
and B/W(Black/White).
 COlOR : The picture is always displayed in color.
: The picture is always displayed in black
 b/W
and white.
- BURST MODE :
the burst signal on B/W mode.
- IR MODE (HIGH/ LOW/ USER) :
When IR LED is turned on in B/W, the
objects can be clearly identified due to the
function that decreases screen saturation
of objects within a short distance.
TOP/BOTTOM/LEFT/RIGHT :
•
After selecting USER, you can adjust the
range according to the location of objects.

When AGC in the EXPOSURE menu is 'OFF', AUTO mode is not available to select.
You can turn on or off the
You can select the duration
You can turn on or off
AUTO SETUP
▶1.BURST MODE
2.COLORB/W
DURATION
DWELL TIME
3.B/WCOLOR
DURATION
DWELL TIME
4.RETURN
BW MODE SETUP
1.BURST MODE
2.IR MODE
3.RETURN
IR MODE SETUP
1. IR MODE
Press SET to Return
English_23
ON
FAST
5 SEC
FAST
10 SEC
ON
HIGH