Defrosting The Fridge; To Change The Light Bulb; Change Of Carbon Filter; When The Appliance Is Not In Use - Electrolux ERZ3600 Instruction Book

Table of Contents

Advertisement

Defrosting the fridge

The fridge is defrosted automatically every time the
compressor stops. Frost formation can be prevented
by:
· not putting warm foodstuff inside the cabinet.
· avoiding frequently opening the door or keeping
it open too long.

To change the light bulb

The light is switched on automatically when the
door is opened. Before replacing the light bulb,
disconnect the power plug from the outlet.
Cut the packaging around the bulb socket.
Keep the packaging on to hold the bulb when setting
it into the socket. Do not touch the bulb with your
bare fingers. Halogen light bulbs are sensitive to
grease from the skin.
Use a clear halogen light bulb.

Change of carbon filter

To maintain the best performance the carbon filter
should be changed once a year with normal usage.
New carbon filters can be purchased from your local
dealer. The filter is placed behind the grill and can be
reached by opening the cover. The cover can be
opened by simultaneously pressing the lever on the
right of grill (1) and turning the cover outward (2).
The carbon filter is then pulled out of its slot (3).
The new carbon filter is placed in the existing slot -
The filter should be handled carefully so fragments
don't loosen from the surface.

When the appliance is not in use

Disconnect the appliance from electricity supply.
Empty all foods and clean the appliance, leaving the
doors ajar to prevent unpleasant smells.
If the cabinet will be kept on, ask somebody to
check it once in a while to prevent the food inside
from spoiling in case of a power failure.

Something Not Working

Before contacting your local Service Force Centre check the following point:
Problem
" " is displayed in the temperature
display.
Or
The yellow Action Freeze and red
warning lamp both flash.
Audible alarm + flashing red warning
lamp. (It is too warm inside the freezer.)
G4
20W/12V
1
2
Possible cause / Remedy
An error has occurred in measuring the temperature. Call your
service representative. (The cooling system will continue to
keep food products cold, but temperature adjustment will not
be possible.)
Switch off the audible alarm by pressing the alarm off button.
The audible alarm could have been triggered by:
The cabinet having been recently switched on and the
temperature still being too high. See the chapter "Switching on
and setting the temperature".
The door may have been open for so long that the `door open'
alarm was triggered.
12
Electrolux 818 37 13-02/6
UV-blocked
Low pressure
3
GB

Advertisement

Table of Contents
loading

Table of Contents