License Plate Lamp - Chevrolet Malibu 2012 Owner's Manual

Hide thumbs Also See for Malibu 2012:

Table of Contents

2. Remove the push pins holding

the trunk trim (B).

3. Move the trim aside far enough

to gain access to the bulb

assembly (A).

4. Turn the bulb socket (B)

counterclockwise to remove it

from the lamp assembly.

5. Pull the bulb (A) from the

6. Install the new bulb.

7. Reverse Steps 1 through 4 to

Vehicle Care

License Plate Lamp

To replace the license plate

1. Remove the license plate bezel

assembly by turning the two

screws counterclockwise.

2. Turn and pull the license plate

lamp assembly forward through

the fascia opening.

3. Turn the bulb socket

counterclockwise and pull the

bulb straight out of the socket.