Tire Changing; Removal And Installation Of The Sealant Canister; Storing The Tire Sealant And Compressor Kit; Removing The Spare Tire And Tools - Chevrolet Malibu 2012 Owner's Manual

10-66 Vehicle Care
14. Return the air only hose (E)
and the power plug (G) back to
their original locations.
15. Return the equipment to its
original storage location in the
vehicle.
Removal and Installation of the
Sealant Canister
To remove the sealant canister:
1. Remove the plastic cover.
2. Unscrew the connector (B) from
the canister (A).
3. Pull up on the canister (A) to
remove it.
4. Replace with a new canister
which is available from your
dealer.
5. Push the new canister into
place.
6. Screw the connector (B) to the
canister (A).
7. Slide the plastic cover back on.
Storing the Tire Sealant
and Compressor Kit
The tire sealant and compressor kit
is located in the trunk.
1. Open the trunk. See
.
2. Lift the cover.
3. Turn the retainer clockwise and
remove the tire sealant and
compressor kit.
To store the tire sealant and
compressor kit, reverse the steps.

Tire Changing

Removing the Spare Tire and
Tools
The equipment you will need is in
the trunk.
1. Open the trunk. See
for more information.