Advertisement
If the system fails to turn on or
activate due to a fault, the ESC/TCS
light will be on solid, and the
SERVICE STABILITRAK message
will be displayed. If the system fails
to turn on or activate due to it not
initializing, the DIC will display
STABILITRAK INITIALIZING.
For more information, see Ride
Control Messages in the owner
manual.
This light will flash on the instrument
panel cluster when the ESC system
is both on and activated.
You may also feel or hear the
system working; this is normal.
When the light is on solid and the
SERVICE STABILITRAK message
is displayed, the system will not
assist the driver in maintaining
directional control of the vehicle.
Adjust your driving accordingly.
See Ride Control Messages in
the owner manual.
The Electronic Stability
Control (ESC) system is
automatically enabled whenever
you start your vehicle. To assist the
driver with vehicle directional
control, especially in slippery road
conditions, you should always leave
the system on. But, you can turn
ESC off if you ever need to.
If the vehicle is in cruise control
when the system begins to assist
the driver maintain directional
control of the vehicle, the ESC/TCS
light will flash and the cruise control
will automatically disengage. When
road conditions allow you to use
cruise again, you may re-engage
the cruise control. See Cruise
Control in the owner manual.
The ESC OFF button is located
on the instrument panel.
To disable both traction control
and ESC, press and hold the
button briefly.
When the ESC OFF button is
pressed, the ESC Off light comes
on and PERFORMANCE MODE
displays in the DIC. The TCS is
still active, but limited to driveline
protection only. ESC is also active,
but is limited to high speed pursuit
purposes.
Advertisement
