G40-30/G40-45/G40-70/G40-70m/Z40-70/Z40-75 Hardware Maintenance Manual
1070 Fan assembly
42
For access, remove these FRUs in order:
• "1010 Battery pack" on page 33
• "1020 Base cover" on page 34
Figure 7. Removal steps of fan assembly
Unplug the fan connector in the direction shown by arrow 1. Then remove the
screws 2.
Note: Be careful not to damage the connector.
Step
Screw (quantity)
M2 × 3.5 mm, flat-head, nylok-coated (3)
2
FAN to C
When installing: Make sure that the connector is attached firmly.
Color
Torque
Black
1.5 ~ 2.0 kgf*cm