Pentax PocketJetII User Manual page 54

The top margin is incorrect
Make sure the correct margins have been set in the software
application. If not, set the margins for the top and bottom of the page
as needed.
Make sure you are not inserting the paper into the paper input slot with
excessive force. Always insert the paper gently.
The image for one page requires more or fewer sheets
than you expected
Make sure the software application and printer driver have been set to
print the same size paper that you are loading into the printer. If the
application or printer driver has been set to print legal-size paper and
you insert letter-size paper, the image will require two sheets. Adjust
the application or printer driver settings as needed or reduce the print
image within your application to fit on the letter-size page.
The data lights will flash to indicate that data is still in the printer after
the page has completed printing.
Certain colors of text do not print
Choose a different color of text. The Windows 3.1 "Universal Print
Driver" is limited to 8 colors (specific colors, not total colors).
The side margins are incorrect
Check to make sure the correct margins have been set in the software
application. Adjust the left margin as needed.
Make sure the software application or the printer driver has been set to
print the same size paper that you are loading into the printer. If the
application or printer driver has been set to print a different width
paper, the image will not print in the proper horizontal position. Adjust
the application or printer driver as needed.
The print does not contain the proper characters
Make sure you have defined the proper character set in the software
application. If not correct, change it.
Trying another font may tell you if the original font was in error.
The print contains random dots
Check the printer driver to make sure it is set correctly. Check the
parallel interface cable to make sure it is connected firmly and
correctly. If possible, replace the interface cable with another and
permanently replace it if it is defective.
Page 46